WANLONG 시간
다이아몬드 톱날을 잘못 사용하면, it will cause the saw blade to rust. 그러므로, when using the diamond saw blade, certain measures must be taken to deal with it so that the saw blade can work normally. 다음, we will briefly explain to you how to deal with rusted saw blades.
Factors causing rust
일반적으로 말하자면, when the saw blade is not in use, it should be placed in a ventilated and dry place, and the packaging should not be damaged. It is best to store it on a wooden rack.
The factors that cause rust on diamond saw blades usually include: damaged packaging, dampness in the place where it is placed, and water mist easily contacts the diamond saw blade from the damaged entrance, causing oxidation.
It may also be because the liquid penetrates into the diamond saw blade packaging where the diamond saw blade is stored, causing oxidation, which leads to rust. 그러므로, when we are not using the saw blade, we must pay attention to the placement and keep it ventilated and dry.
How to deal with rusty diamond saw blades
If you find that the 톱날 is rusted, don’t use it as usual at this time. This can easily damage the saw blade, especially easy to cause tooth collapse and other phenomena. Before using it, you must perform rust removal and other operations.
1. Check the rusted part first. If it is the base part, it is easy to deal with. Just use our common rust removal method.
2. If the rusted part is on the sawtooth, it will be troublesome. In this case, you must use a diamond grinding wheel to deal with it, because the sawtooth is the most sensitive part of the saw blade. Once it is improperly handled, 톱날 사용에 심각한 영향을 미치며 다이아몬드 톱날이 폐기될 수 있습니다.